Multi-arm ultrasonic cleaning line

Dobby type automatic cleaning machine is suitable for cleaning and drying aluminum parts. Its working principle is to manually put the workpiece to be cleaned into the cleaning basket, send the cleaning basket into the cleaning machine body and clean and dry according to a certain procedure, and then lift the cleaning basket to discharge. The equipment has beautiful appearance, reasonable structure and long service life. It is an ideal cleaning equipment.

---Using a set of dobby manipulators to lift the tooling basket, with high positioning accuracy, stable transmission and reliable operation.

---Adopt PLC automatic control, with two sets of manual and automatic operating systems, which can change the cleaning parameters according to the actual situation.

---Each tank can be equipped with a liquid storage tank, which is equipped with a circulating filter system, a heating automatic temperature control system, and a liquid level protection automatic replenishing system.

--- The whole equipment is a fully enclosed structure, which can be sealed with all stainless steel, and an observation window is installed to facilitate observation of the operation.

---The whole machine has a high degree of automation, and the operation is simple and safe.

---Main technical parameters of multi-arm ultrasonic cleaning equipment

---1 set of loading and unloading table

---Equipment main line (6 stations) 1 set

---Air pump water cutting system 1 set

--- 1 set of hot air drying system

---Dobby transmission system (translation and lifting) 1 set

---Underframe 1 set

---Outer cover 1 set

---Electronic control system 1 set

---Cleaning the workpiece: Processing capacity: According to the actual situation, the net size of the workpiece basket: 500×800×300 (mm); Quantity: 12 pieces.

--- Feeding height: 550mm;

---Equipment working time: 8 hours/day;

---Cleaning fluid: cleaning agent, city water, pure water;

---Cleaning time: 3～5 minutes/frame (adjustable);

---Ultrasonic: total ultrasonic power 12Kw×25KHz (ultrasonic rough washing tank 5KW, ultrasonic fine washing tank 5KW, ultrasonic rinsing tank 3KW);

---Total heating power: The heating power of the cleaning tank is 60KW, and the drying power is 18KW;

---Total power of equipment: about 85KW.

---Equipment dimensions (approximately): 10000×2500×2600(mm);

---Environmental requirements: air temperature: -5～40℃, relative humidity: ≤80%;

---Note: This equipment is customized according to the characteristics of cleaning products and non-standard design according to actual requirements. It has strong flexibility and can be used in the cleaning process of equipment in various industries.