I. Overview:

The SCR out-of-stock catalyst ultrasonic cleaning line has a total of 12 stations. Its working principle is to use mechanical vibration with strong ultrasonic penetration to impact the inner and outer surfaces of the workpiece to make the surface of the workpiece clean. The key parts of the electrical control part of this equipment are all high-quality parts with reliable performance and long service life.

Second, the technological process

Cleaning process: feeding → ultrasonic cleaning → ultrasonic cleaning → ultrasonic cleaning → spray cleaning → bubbling cleaning → bubbling rinsing → bubbling rinsing → bubbling rinsing → active load → active load → active load → active load → unloading.

Third, the main components of the equipment

3-1. Equipment main line (12 stations) 1

3-2, bottom frame and outer cover 1 set

3-3, 1 set of piping system

3-4, 1 set of electric control system

3-5. 1 set of maintenance platform

Four, equipment technical parameters

4-1. Equipment input parameters:

4-1-1. Product size: SCR catalyst module

4-1-2, cleaning cycle: about 15min (varies according to the situation)

4-1-3. Continuous working time: 24 hours

4-1-4. Workpiece weight: 2 tons

4-2. Equipment use conditions:

4-2-1. Power supply: 380V±5%, frequency 50Hz, three-phase five-wire system

4-2-2. Liquid source: 2" total liquid inlet pipe

4-2-3. The overall dimensions of the equipment: refer to the plan

4-2-4. Temperature and humidity: ambient temperature: -5~40℃; relative humidity: ≤80%

4-2-5. Sewage discharge: DN100

4-2-6. Total power of equipment: about 370KW