Welcome to the official website of iSonics Smart Clean Jiangsu Co.,Ltd!
Suspended chain cleaning machine
Equipment name: Suspended chain washing and drying machine
Overview: The suspension chain cleaning and drying machine is suitable for removing impurities such as oil, iron filings and dust attached to the surface of the steering knuckle. The equipment has 1 spray cleaning room, 1 spray rinsing anti-rust room, 1 compressed air cutting room, 1 drying room, 1 manual paint repairing place, 1 drying room, 1 manual There are seven stations for spraying anti-rust oil. Its working principle is to manually put the processed parts into the sling on the catenary, wash and dry the paint manually and spray anti-rust oil through the power track according to a certain technological procedure. The equipment has beautiful appearance, reasonable structure and long service life. It is an ideal cleaning equipment.
This equipment has the following characteristics:
Automatic transmission of cleaning parts;
According to the cleanliness requirements of the workpiece, the cleaning time can be adjusted arbitrarily;
Main components of equipment
Catenary system:
Power track 1 set
Rotation system 1 set
Cleaning system: 1 set
Spray cleaning system 1 set
Spray rinsing anti-rust system 1 set
Compressed air water cutting system 1 set
Hot air drying system 1 set
Hot air drying system 1 set
Bracket 1 set
1 set of outer cover
Electric control system 1 set
Main technical parameters of the equipment:
Equipment technical parameters
Cleaning workpieces: iron parts, aluminum parts;
The catenary is a spreader every 1 meter, and the total load-bearing capacity of the catenary (approximately) ≥1200kg;
The effective conveying width is 500mm;
Working speed: 0.3m/min; working speed range: 0.1-1.5m/min; (adjustable by frequency conversion)
Cleaning fluid: water agent, cleaning agent, anti-rust agent;
Spray cleaning section: submerged spray pump, flow Q=18m3/h, head 64m, motor power: 7.5KW, quantity: 1;
Spray rinsing anti-rust section: submerged spray pump, flow Q=18m3/h, head 64m, motor power: 7.5KW, quantity: 1;
Spray anti-rust oil: centrifugal pump, flow Q=2m3/h, head 20m, motor power: 0.37KW, quantity: 1;
Total heating power: 60KW/380V (AC);
The overall dimensions of the cleaning equipment (approximately): 12000×3000×3000, of which the overall dimensions of the cleaning equipment: 8000×1500×3000;
Total power of cleaning equipment: about 72KW;
Total weight of cleaning equipment: about 5T.
Cleaning equipment power equipment: power supply: three-phase four-wire system 380V/50HZ.
Brief operation
Manual work: The operator loads and unloads the work piece at the loading and unloading place, touches up the paint at the paint retouching place, and sprays the rust preventive oil at the place where it is sprayed.
Automatic operation: the workpiece is conveyed by the power catenary and passes through the cleaning procedures (the workpiece can be automatically rotated in the cleaning section).
Indication method
The temperature of each cleaning water tank is displayed;
Liquid level control alarm indication for lack of liquid.
Emergency stop protection.
Main process flow
Cleaning process: feeding → spray cleaning (spray pump + electric heating + oil-water separator + workpiece automatic rotation) → spray rinsing and rust prevention (spray pump + electric heating + workpiece automatic rotation) → compressed air to cut water (workpiece Automatic rotation) → drying (hot air fan + air heating + automatic rotation of the workpiece) → manual paint touch-up (manual rotation) → drying (hot air fan + air heating) → manual spraying of anti-rust oil (manual rotation) → unloading.
Note: This equipment is customized according to the characteristics of cleaning products and non-standard design according to actual requirements. It has strong flexibility and can be used in the cleaning process of equipment in various industries.
Main technical parameters of the equipment:
Equipment technical parameters
Cleaning workpieces: iron parts, aluminum parts;
The catenary is a spreader every 1 meter, and the total load-bearing capacity of the catenary (approximately) ≥1200kg;
The effective conveying width is 500mm;
Working speed: 0.3m/min; working speed range: 0.1-1.5m/min; (adjustable by frequency conversion)
Cleaning fluid: water agent, cleaning agent, anti-rust agent;
Spray cleaning section: submerged spray pump, flow Q=18m3/h, head 64m, motor power: 7.5KW, quantity: 1;
Spray rinsing anti-rust section: submerged spray pump, flow Q=18m3/h, head 64m, motor power: 7.5KW, quantity: 1;
Spray anti-rust oil: centrifugal pump, flow Q=2m3/h, head 20m, motor power: 0.37KW, quantity: 1 piece;
Total heating power: 60KW/380V (AC);
The overall dimensions of the cleaning equipment (approximately): 12000×3000×3000, of which the overall dimensions of the cleaning equipment: 8000×1500×3000;
Total power of cleaning equipment: about 72KW;
Total weight of cleaning equipment: about 5T.
Cleaning equipment power equipment: power supply: three-phase four-wire system 380V/50HZ.