Welcome to the official website of iSonics Smart Clean Jiangsu Co.,Ltd!

Suspended washing machine
Suspended automatic ultrasonic cleaning machine
Overview: Suspended automatic ultrasonic cleaning machine is suitable for removing oil, iron filings, dust and other impurities attached to the surfac···
Online consultation
18651121666
  • Product description
  • Specifications
Product Description Product description

Suspended automatic ultrasonic cleaning machine


---Equipment name: Suspended automatic ultrasonic cleaning machine


---Overview: Suspended automatic ultrasonic cleaning machine is suitable for removing oil, iron filings, dust and other impurities attached to the surface of the steering knuckle. The equipment has 1 spray cleaning room, 1 spray rinsing anti-rust room, 1 compressed air cutting room, 1 drying room, 1 manual paint repairing place, 1 drying room, 1 manual There are seven stations for spraying anti-rust oil. Its working principle is to manually put the processed parts into the sling on the catenary, wash and dry the paint manually and spray anti-rust oil through the power track according to a certain technological procedure. The equipment has beautiful appearance, reasonable structure and long service life. It is an ideal cleaning equipment.


 


---This equipment has the following characteristics:


---Automatic transmission of cleaning workpieces;


---Adjust the cleaning time arbitrarily according to the cleanliness requirements of the workpiece;


---The main composition of the equipment


---Catenary system:


---Power track 1 set


---Rotating system 1 set


---Cleaning system: 1 set


---Spray cleaning system 1 set


---Spray rinsing anti-rust system 1 set


---Compressed air water cutting system 1 set


--- 1 set of hot air drying system


--- 1 set of hot air drying system


---Bracket 1 set


---Outer cover 1 set


---Electronic control system 1 set


 


---The main technical parameters of the equipment:


---Equipment technical parameters


---Cleaning parts: iron parts, aluminum parts;


---The catenary is a spreader every 1 meter, and the total load-bearing capacity of the catenary (approximately) ≥1200kg;


---The effective conveying width is 500mm;


---Working speed: 0.3m/min; working speed range: 0.1-1.5m/min; (adjustable by frequency conversion)


---Cleaning fluid: water agent, cleaning agent, anti-rust agent;


---Spray cleaning section: submerged spray pump, flow Q=18m3/h, head 64m, motor power: 7.5KW, quantity: 1;


---Spray rinsing anti-rust section: submerged spray pump, flow Q=18m3/h, head 64m, motor power: 7.5KW, quantity: 1;


---Spray anti-rust oil: centrifugal pump, flow Q=2m3/h, head 20m, motor power: 0.37KW, quantity: 1 piece;


---Total heating power: 60KW/380V (AC);


---Outline size of the cleaning equipment (approximately): 12000×3000×3000, of which the overall size of the cleaning equipment: 8000×1500×3000;


---Total power of cleaning equipment: about 72KW;


---Total weight of cleaning equipment: about 5T.


---Cleaning equipment power equipment: power supply: three-phase four-wire system 380V/50HZ.


 


---Brief operation


----Manual work: The operator loads and unloads the work piece at the loading and unloading place, touches up the paint at the paint retouching place, and sprays the rust preventive oil at the place where it is sprayed.


---Automatic operation: The workpiece is conveyed by the power catenary, and passes through various cleaning procedures (the workpiece can be automatically rotated in the cleaning section).


 


---Instruction method


---The temperature display of each cleaning water tank;


---Lack of liquid alarm indication for liquid level control.


---Emergency stop protection.


 


---Main process flow


---Cleaning process: feeding → spray cleaning (spray pump + electric heating + oil-water separator + workpiece automatic rotation) → spray rinsing and rust prevention (spray pump + electric heating + workpiece automatic rotation) → compressed air cutting Water (automatic rotation of the workpiece) → drying (hot air fan + air heating + automatic rotation of the workpiece) → manual touch-up (manual rotation) → drying (hot air fan + air heating) → manual spraying of anti-rust oil (manual rotation) → down material.


 


---Note: This equipment is customized according to the characteristics of cleaning products and non-standard design according to actual requirements. It has strong flexibility and can be used in the cleaning process of equipment in various industries.





Specifications Specifications

---The main technical parameters of the equipment:


---Equipment technical parameters


---Cleaning parts: iron parts, aluminum parts;


---The catenary is a spreader every 1 meter, and the total load-bearing capacity of the catenary (approximately) ≥1200kg;


---The effective conveying width is 500mm;


---Working speed: 0.3m/min; working speed range: 0.1-1.5m/min; (adjustable by frequency conversion)


---Cleaning fluid: water agent, cleaning agent, anti-rust agent;


---Spray cleaning section: submerged spray pump, flow Q=18m3/h, head 64m, motor power: 7.5KW, quantity: 1;


---Spray rinsing anti-rust section: submerged spray pump, flow Q=18m3/h, head 64m, motor power: 7.5KW, quantity: 1;


---Spray anti-rust oil: centrifugal pump, flow Q=2m3/h, head 20m, motor power: 0.37KW, quantity: 1 piece;


---Total heating power: 60KW/380V (AC);


---Outline size of the cleaning equipment (approximately): 12000×3000×3000, of which the overall size of the cleaning equipment: 8000×1500×3000;


---Total power of cleaning equipment: about 72KW;


---Total weight of cleaning equipment: about 5T.


---Cleaning equipment power equipment: power supply: three-phase four-wire system 380V/50HZ.


 


18651121666