Automatic rotary ultrasonic cleaning machine

---Equipment name: Automatic rotary ultrasonic cleaning machine

---Overview: The automatic rotary ultrasonic cleaning machine can remove the oil, dust and other impurities attached to the surface of the part through ultrasonic, rinsing and other processes. The equipment has 1 ultrasonic rough washing tank, 1 ultrasonic fine washing tank, 2 bubbling rinsing tanks, 4 drying tanks, and a total of eight stations. The equipment has beautiful appearance, reasonable structure and long service life. It is an ideal cleaning and cleaning equipment.

---The main composition of the equipment

---Upper and unloading table (φ50 power conveying roller) 1 set

---Equipment main line (8 stations) 1 set

---Gantry arm drive system (translation and lifting) 2 sets

--- 8 sets of rotating system

---Underframe 1 set

---Outer cover 1 set

---Electronic control system 1 set

---The main technical parameters of the equipment

---Equipment technical parameters

---Cleaning and cleaning the workpiece: front end cover, back end cover,

---Processing capacity: 3 minutes/frame after normal operation

---Workpiece basket: 420×550×500 (mm); Quantity: 15 pieces, rotating cleaning frame: Ф360×560 (mm)

---Cleaning fluid: municipal water, cleaning agent;

---Cleaning time: 3 minutes/frame (adjustable);

---Ultrasonic: total ultrasonic power 9.6Kw, 25KHz (ultrasonic rough washing tank 4.8KW, ultrasonic fine washing tank 4.8KW);

---Equipment dimensions (approximately): 10000×2400×3000(mm);

---Total power of equipment (approximately): 155KW;

---Environmental requirements: air temperature: 0～40℃, relative humidity: ≤85%;

---Brief operation

---Manual work: The operator loads and unloads the workpieces at the inlet and outlet ports at both ends of the equipment.

---Automatic operation: PLC, touch screen automatic operation control the workpiece to go through each cleaning process automatically.

---way to control

---PLC program controller, touch screen operation, the entire operation interface is based on humanized design, all Chinese digital operation interface, you can set the cleaning process parameters on the control panel according to the cleaning requirements, such as each process time, cleaning fluid heating, etc. .

---Operation instructions

---Buttons and switches have light indications. The front of the main unit is equipped with green, red, and yellow indicator lights. Green means normal operation, red means shutdown due to failure, and yellow means standby.

---Protection settings

--- Motor, pump, fan overload protection.

---Temperature abnormal protection.

---Ultrasonic load open circuit and short circuit protection.

---Emergency stop buttons and alarm devices are installed at the inlet and outlet of the equipment.

---Liquid level control low liquid alarm indication

---Main process flow

---Cleaning process: manual frame loading (power roller conveyor) → ultrasonic rough cleaning (ultrasonic + electric heating + temperature control + circulating filtration) → ultrasonic fine cleaning (ultrasonic + electric heating + temperature control + circulating filtration) → Bubbling rinsing (circulation filtration + temperature control) → bubbling rinsing (temperature control + long flowing water) → drying (blowing + temperature control + air pump) → drying (blowing + temperature control + air pump) → drying (Air blowing + temperature control + air pump) → drying (air blowing + temperature control + air pump) → manual feeding (power roller conveyor)

---Note: This equipment is customized according to the characteristics of cleaning products and non-standard design according to actual requirements. It has strong flexibility and can be used in the cleaning process of equipment in various industries.