Cleaning room and spindle:

The main shaft adopts imported sealing material; the C-axis is positioned to clean the side of the part; the sealing pressure is up to 60Mpa; the cleaning stroke: 700*600*500 (mm)

The visible parts of the cleaning room are covered by stainless steel, which has a good anti-rust effect; the outer cover is double-sealed, which has better water tightness and sound insulation; the fourth axis is added, and the workpiece is completely cleaned without dead corners.

Tool magazine:

In-line tool magazine with a capacity of 4; automatic opening and closing upper cover, stainless steel shell; flat nozzle, universal nozzle, deep hole nozzle and brush.

operating system:

System configuration The FANUC OI-mate Mf system is stable, highly reliable, and has a high market penetration rate and can be operated skillfully.

The screen above the operation panel is equipped with high-pressure water pressure and water temperature monitoring; the cleaning pressure can be adjusted in real time by frequency conversion; different pressures can be selected for different tools.

XYZ device:

Taiwan HIWIN guide rail + automatic lubrication + organ type protective cover imported high-pressure hose FANUC servo motor sheet metal full enclosure protection, isolated from the cleaning room.

Water tank:

Self-cleaning three-stage circulating filtration capacity is 1000L.

The first-level filter block filter, filter large particles, and shaved.

The secondary filter passes through a mesh bag filter with a filtration accuracy of 10 microns.

Three-stage filter mesh bag filter, with a filtration accuracy of 5 microns.

High pressure pump unit:

Equipped with an automatic frequency conversion device, the pressure of the high-pressure pump can be changed from 0-500 kg at any moment.

According to different workpiece materials, choose a suitable cleaning pressure.

When cleaning the surface, the pressure is lowered and deburring is required. When the inner hole is cleaned, the pressure instantly becomes higher.

Practical range:

Auto parts industry; hydraulic industry; high-speed rail/aviation industry.